SPONTEX Wall Putty

SPONTEX WALL PUTTY is a high quality white cement based Putty that can be used as a base on concrete/mortr walls for any type of paint/distemper or emulsion. It prevents water seepage, peeling and flaking-off of your expensive coatings. It is a truly versatile product that can be applied on interior as well as exterior surfaces. The manufacturing process involves addition of superfine mineral particles and organic comppunds that significantly improve the life of paints and provide strength and durability to your walls.

SPONTEX WALL PUTTY conforms to stringent British and German building material quality standards in core areas like Tensile Adhesion Strength, Compressive Strength, Setting Time and Water Absorption Coefficent.

Salient Features :

  • Forms a very durable base for your paint.
  • Prevents seepage and efflorescence.
  • Additives improve spreading and hardness.
  • Prime ingredient of SPONTEX WALL PUTTY is high quality White Cement which provides high degree of adhesion with an elegant, smooth white finish.
  • SPONTEX WALL PUTTY is suitable for Interior and Exterior surfaces.
  • Can be applied on moist surfaces with ease.
  • It is water resistant.
  • SPONTEX WALL PUTTY is completley resilient towards fungal and algae growth.
  • No unpleasant smell or residue at the time of application.
  • No Curing is required.
  • Unique Triple-Layer packaging improves shelf life and durability.
  • Unique formulation gives SPONTEX WALL PUTTY a significantly lower setting time.
  • No primer is required before application.
  • Manufactured in powder form, from micronized minerals and additives to provide high strength and better coverage.
  • Completely Non-Toxic and safe.
  • Can be used as a base toany kind of paint or emulsion.
  • Stringent quality ensures your peace of mind.


PropertySPONTEX WALLPUTTYReference (Singapore HDB)Protocol AdoptedTesting Standard
Tensile Adhesion Strength
N/MM2@28 days
1.2>0.8 N/MM2EN 1348British Standards Institution
Compressive Strength
N/MM2@28 days
9.17-12 N/MM2EN 196British Standards Institution
Setting Time (Min) Initial-


EN 196British Standards Institution
Water Absorption Coefficient
0.82---DIN 52617Deutsches Institut Fur Normung E.V.

Application :

  • Mix SPONTEX WALLPUTTY with 30-35% water to make a paste and continue mixing till a uniform consistency is achieved.
  • Apply first coat of the paste on already moistened surface in a bottom-upwards fashion with the help of of filling blade (patti/pattra), this will ensure less wastage and smooth finish.
  • Gently rub the surface with a wet sponge in order to remove loose particles.
  • Allow the surface to dry for atleast 4-5 hours, then apply second coat, leave the surface to dry completely for atleast 24 hours or till desired hardness is achieved.
  • The prepared quantity of putty-paste should be used within 2-3 hours of preparation.
  • The total thickness of the coats should not exceed 1.5mm

Coverage : The coverage area depends upon the porosity of the substrate; however, on a smooth, normal mortar wall it is 1.70 to 2.5 m2/kg/mm in double coat.

Product Images

Packing: 5kg & 20kg Triple-layered Packs